-
- ARAI GP-6S SAH2010 & FIA HELMET
ARAI GP-6S SAH2010 & FIA HELMET
Availability
In Stock
Using the same shell shape as the GP-6 PED, the GP-6S is designed with the sport racer in mind
Description
Using the same shell shape as the GP-6 PED, the GP-6S is designed with the sport racer in mind. Using the familiar single intake and exhaust as the outgoing GP-5K, the GP-6S improves on this design with and enlarged front vent for improved ventilation. With many of the same features as it's big brothers, the GP-6S might be affordable, but it'll still be the most comfortable helmet you've ever owned!
Technical Information
| Rating: | Snell SAH2010, SA2010, FIA 8858-2010 |
| Hans Anchors: | Not Included, Pre-Drilled & Threaded |
| Weight (MD Size): | 3.55 lbs |
| Part Number: | ARGP6SH10 SIZE COLOR |
| Manufacturer: | GP6SH10 SIZE COLOR |
- Simple to use positive shield lock mechanism
- Improved shield pivot hardware aerodynamics and Type "6" 3mm shield
- Wider eye-port for increased peripheral field of view
- Large, closeable front and rear intake vent with 10mm holes for increased air intake
- Sculpted chin bar and ridge along lower edge of shell to improve structural integrity
- Raised shell above the shoulders for added clearance
Sizing
An effective helmet is one that fits properly. Have an assistant use a measuring tape, or a piece of string to measure the circumference of your head starting at a point approximately one inch above the eyebrows in front, around a point in the back of the head that results in the largest possible measurement, and finally wrapping back to the front. It is a good idea to take several measurements to make sure you have the largest one.
or follow us on
